Permanent magnet Variable Motor Machine Demand Saving Electric On Air Compressor

• Customization: Available
• Lubrication Style: Lubricated or Oil-Less
• Cooling System: Air Cooling/Water Cooling
• Model NO.: DAV55+~DAV250+
• Power Source: AC Power
• Cylinder Position: Vertical
• Structure Type: Closed Type
• Installation Type: Stationary Type
• Type: Twin-Screw Compressor
• Air End: Aerzen/Denair
• Style: Screw Air Compressor
• Approved: ISO9001/Ce/Gc
• Bearings: Sweden SKF
• Motor: Zoda
• Pressure Sensor: Denmark Denfoss
• Portable Name: Permanent Magnetic Variable Air Comp
• Starting Method: Variable Frequency Starting
• Driven Method: Direct Driven
• Performance: Explosion-Proof
• Transport Package: Export Standard Packing
• Specification: CE, SGS, BV, ISO9001 certification
• Trademark: Denair
• Origin: Shanghai, China
• HS Code: 8414809090
• Production Capacity: 100 Sets Per Day
• Package Size: 350.00cm * 220.00cm * 230.00cm
• Package Gross Weight: 5500.000kg

Product Description

Industrial Doulbe Permanent Magnet Synchronous Motor (PMSM) Variable Frequency Converter Drive Pm VSD Inverter Screw Air Compressor Advantage 
 

01 Features Of permanent Magnet Variable Frequency Air Compressor

• Ultra-low temperature rise design, which allows the compressor running at ultra-low frequency for a long time.
• Closed-loop vector control system for faster control and more precise speed control.
• The compressor unit can still operate efficiently when the frequency is reduced by more than 50%.
• The pressure is stable and the pressure fluctuation is accurately controlled within 0.1 bar.
• The figure shows a comparison of several starting methods. It can be seen that the frequency converter is slowly accelerated to start, the starting is more stable, and the current peak is completely avoided.

 

02 Air End

• More stable, no mechanical transmission failure: high-efficiency permanent magnet synchronous motor and screw male rotor adopt embedded-integrated shaft direct connection structure, no gear transmission, completely eliminate gear pitting or broken teeth; Two independent permanent magnet motors are integrated directly drive two air ends, no coupling failures.
• More energy efficient, the air end is always running at energy-saving speed.
• More efficient and efficient permanent magnet motor + no transmission efficiency loss.
• More comfortable, low running noise, eliminating three sources of noise: no-click bearing noise, no gear meshing noise, no coupling drive noise.
• More compact: The permanent magnet motor is small in size and the integrated structure saves space.
• Under the set frequency conversion pressure, the unit will automatically adjust to keep the output pressure within ± 0.1 bar, reducing unnecessary waste (the power consumption increases by 7% for every 1 bar of pressure increase)

 

03 Advantages of Permanent Magnet Motors Compared to General Asynchronous Motors

• High efficiency: Eliminates excitation system losses and improves efficiency.
• It is still efficient under low load conditions: the energy efficiency of a permanent magnet motor is more than 9% higher than that of a conventional asynchronous motor at full load operation, and its energy efficiency remains unchanged as the speed decreases.
• Large overdrive torque: The ratio of the maximum starting torque of the permanent magnet synchronous motor to the rated torque can be more than 3 times, while the general asynchronous motor is only 1.6 times.
• The control is more stable: the corresponding time of the permanent magnet motor is <50ms, and the gas production can be adjusted in a large range in an instant, so that the gas pressure is truly stable.

 

04 Stainless Steel Piping Design

• The piping arrangement is simple and beautiful. Stainless steel piping design to effectively prevent rust in the pipeline, and avoid safety accidents caused by leakage of the pipeline.

05 More Advanced Technology. More Powerful Inverter

• The standard equipment is equipped with a high-frequency reactor to reduce the high frequency generated by the inverter.
• The soft start of the inverter reduces the peak current at startup, resulting in a smooth start and greatly reduced power costs.
• Forced cooling of the inverter to prevent high temperature shutdown in Summer.
• Standard equipment dust screen, circuit board surface coating treatment, high efficiency and durability against dirt, dust, moisture.
• The special design of the heat dissipation area of the inverter ensures stable operation of the inverter under high temperature environment.
• No idling occurs under any load conditions to achieve the desired power saving effect.
• Quickly track changes in pressure, control pressure fluctuations within ±0.1 bar, and optimize the use of the power to accurately provide the right amount of air as needed

06 Oil Filter

• The imported brand is used to reliably filter the dirt particles in the lubricating oil to ensure the smoothness and lubrication of the oil system at 0.1 micron.

 

07 Air Filter

• The imported brand is used to reliably remove dirt from the air. The dust particles in the air are controlled below 0.3 microns and the filtration accuracy is as high as 99.99%.

Technical Parameters Of Variable Frequency Air Compressor with PMSM Motor

Model	Maximum working pressure		Capacity(FAD)		Installed motor power		IP Grade	Noise level	Dimensions (mm)			Weight	Air outlet pipe diameter	Starting Method	EEI
	bar(e)	psig	m3/min	cfm	kw	hp			(L)	(W)	(H)	kg
DAV-55+	7	102	6.46-12.93	228-457	55	75	IP54	75	1900	1500	1590	1500	DN50	Direct Driven Air Cooling	EEI1
	8	116	6.32-12.63	223-446
	10	145	5.83-11.66	206-412
DAV-75+	7	102	7.99-15.98	282-564	75	100	IP54	75	1900	1500	1590	1700	DN50
	8	116	7.89-15.79	279-558
	10	145	7.12-14.24	251-503
DAV-90+	7	102	10.81-21.62	382-763	90	120	IP54	78	2650	1700	1850	2550	DN80
	8	116	10.18-20.36	359-719
	9	131	9.92-19.83	350-700
	10	145	9.41-18.81	332-664
DAV-110+	7	102	12.52-25.04	442-884	110	150	IP54	78	2650	1700	1850	2550	DN80
	8	116	12.07-24.14	426-852
	9	131	11.46-22.93	405-810
	10	145	11.09-22.19	392-784
DAV-132+	7	102	15.15-30.29	535-1070	132	175	IP54	78	2650	1700	1850	3100	DN80
	8	116	14.53-29.06	513-1026
	9	131	13.49-26.99	476-953
	10	145	12.09-24.18	427-854
DAV-160+	7	102	18.45-36.91	651-1303	160	215	IP54	80	3000	1950	2030	4000	DN100
	8	116	17.63-35.26	623-1245
	9	131	16.47-32.94	581-1163
	10	145	15.72-31.44	555-1110
DAV-185+	7	102	21.05-42.11	743-1487	185	250	IP54	85	3000	1950	2030	4300	DN100
	8	116	19.79-39.58	699-1398
	9	131	18.74-37.47	662-1323
	10	145	17.89-35.79	632-1264
DAV-200+	7	102	22.25-44.49	786-1571	200	270	IP54	85	3000	1950	2030	4700	DN100
	8	116	21.31-42.61	752-1505
	9	131	19.30-38.60	681-1363
	10	145	17.85-35.71	630-1261
DAV-220+	7	102	24.14-48.28	852-1705	220	300	IP54	85	3500	2200	2300	5000	DN125
	8	116	23.91-47.82	844-1689
	9	131	22.89-45.79	808-1617
	10	145	20.42-40.83	721-1442
DAV-250+	7	102	28.24-56.48	997-1994	250	350	IP54	85	3500	2200	2300	5500	DN125
	8	116	26.54-53.08	937-1874
	9	131	25.45-50.89	899-1979
	10	145	23.00-46.00	812-1624
*) FAD in accordance with ISO 1217:2009, Annex C: Ansolute intake pressure 1 bar (a), cooling and air intake temperature 20ºC **) Nosie level as per ISO 2151 and the basic standard ISO 9614-2, operation at maximum operating pressure and maximum speed; tolerance:±3 dB(A) Specifications are subject to change without prior notice

 

We carefully selected for you the classic case

14 sets of VSD air compressor for 40HQ are ready for packing and delivering to DENAIR distributor in Buenos Aires, Argentina. The compressors are high-end customized for Argentina market with Germany MANN filters, France SCHNEIDER inverter, Belgium CMC controller, etc.

DENAIR Facotry


DEANIR Customer


DENAIR Exhibitions


DENAIR Packing

FAQ

Q1: Are you factory or trade company?  
A1: We are factory.

Q2: What the exactly address of your factory? 
A2:  Our company is located in No. 6767, Tingfeng Rd. Jinshan District, Shanghai 201502, China
And our factory is located in No. 366, YangzhuangBang Street, Pingxing Rd., Xindai Town, Pinghu, Zhejiang Province, China

Q3: Warranty terms of your machine? 
A3: Two years warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts of the Air Compressors? 
A4: Yes, of course.

Q5: How long will you take to arrange production? 
A5: 380V 50HZ we can delivery the goods within 10 days. Other electricity or other color we will delivery within 22 days

Q6: Can you accept OEM orders? 
A6: Yes, with professional design team, OEM orders are highly welcome.